|
 |
|
Circular Pump |
|
|
MODEL: PBG |
|
|
OPERATING LIMITATIONS: Suitable liquid: Heating water to Vd12035 water/glycol mixtures,max,mixing ratio:1:1 Hydraulic corrections required for mixing ratio above 20% Liquid temperature range: -10℃+110℃
|
|
|
 |
|
- Product introduction
- Motor Features
- Technical data
This pump adopts shielding set of stainless steel and keep water away from electrical machinery completely, Mechanical seal is not required, thus completely solve pump leaking, adopted the ceramic bearing. It has long-working time, and has completely solved the noise problem in working.
With automatic-controlling devices, it is easy for operation.
Some parts of pump are made of stainless steel, which keep water much more sanitary.
This pump adapts to the cold pressurized circulation of hot water under 110 degree Centigrade.
Especially this pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure.
When the tap water is of low pressure, automatic switch may beprovided. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments,and increase oxygen for rearing ponds and fish tanks.
15PBG-10
15:Connection size
PBG:Circular pump
10:Hightet head
25PBG-13
25:Connection size
PBG:Circular pump
13:Hightet head
Motor
Mains power:220V/50Hz,127V/60Hz
Insulation class F
Protection IP44
Material
Pump body:Cast iron
Impeller: PPO
Shaft with rotor:Porcelain
Accessories
Union connector fitting,thermal insulation
mounting positions
Pump shaft in the horizontal plane,
terminal box optionally 3.6.9 or 12 o'colck
Pump equipment
Screwed end single head pump
Single-speed automatic switch
Non-overloading single phase motor
|
|